Want this question answered?
timing is preset and there is no adjustment!
I believe you need to drive it so the ECM relearns it's idle.
there are no 2000 yaris that would be an echo
On a 2000 yaris 1.0 GS - there is no fuel filter to change in the service schedule. The man at Toyota Parts reckoned the filter was just placed in fuel tank. That's why the Yaris is cheap to service :- no fuel filter and no timing belt (chain driven).
unplug the battery for 2min
The distributor is synched or zeroed with the scan tool. It can not be done with a timing light.
Ignition timing for 2000 Dodge 3.9L engine is set and maintained automatically by the engine's electronic control module and is not possible to change.
The ignition timing can be adjusted. Attach the timing light to the battery and connect it to the cylinder. Loosen the distributor adjustment bolt and start the engine. Remove the vacuum hose from the carburetor. Read the timing and make the necessary adjustments.
Turn the distributer to the right very slightly
In order to reset the service light on a 2000 reg Megan you\'ll need to start by turning the ignition switch to the "On" position without starting the engine. Once the service light appears on the dashboard you can reset it by following these steps: Press and hold the odometer reset button Turn the ignition switch to the "Off" position Release the odometer reset button Turn the ignition switch back to the "On" positionAfter following these steps the service light should reset and no longer appear on the dashboard.
needs different octane fuel or ignition timing off
It is near the bottom of the timing belt in a Chevy. It is part of the ignition system.