Did you replace it with the correct cluster ? the later ones are not compatible. You can replace the circuit board with a new one
instrument panel,or guage cluster
== ==
how do i reset the sensor on the instrument cluster on a 1984 corvett?
There is no easy way. The instrument cluster will have to be removed.
you pull the release latch on the drivers side of the instrument cluster, it is all mechanical and does not need battery power
I had a blown 25 amp fuse in the fuse box under the hood mounted on drivers side fender, it was labeled for power outlet, I believe it was fuse #11. I removed the other 25 amp fuse for the other power outlet and installed it where the burnt fuse was and my instrument cluster worked. It was not labeled for the instrument cluster.
The gauges on the dash is the instrument cluster.
To get a 2003 F-150 Truck to start after replacing the instrument cluster the cluster will have to be re-programmed. A dealer or possibly a locksmith can reprogram an instrument cluster.
Disconnect negative battery cableTilt the steering wheel to its lowest position and remove the instrument cluster bezelRemove the instrument cluster retaining screwsPull the instrument cluster out,unplug the electrical connectors from the backside and the shift indicator from the bottom (automatic trans models) then remove the cluster from the instrument panel
The instrument cluster is what houses the speedometer, and the gauges.
Remove instrument cluster in a 2003 olds aurora
== ==