You have to repair the cause of the light coming on. The airbag computer will have set a code about the cause. See related question for more info.
Disconnecting the battery is the easiest way. Then disconnect the airbag.
The airbag is disabled by disconnecting the negative battery terminal for at least 5 minutes and leaving it disconnected.
Yes it happened to me. My airbag light is flashing after changing the battery and the mechanic not following procedure
The airbag light in the 2003 GMC ENVOY can be reset by disconnecting the battery for about 5 minutes. Then reconnect the battery, turn the key to on without starting the vehicle, and pump the gas pedal three times if the light is still on after reconnecting the battery.
When a car is being inspected, it cannot have the airbag light on. The light can be reset by an OBDii scanner, that will clear the code causing the problem or by disconnecting the battery for 30+ minutes.
Yes, but you need to swap your airbag system if your GTI steering wheel hasn't got one. This will mean disconnecting your battery for at least 10 mins disconnecting airbag system, which will mean removing centre consol. Best get a Hayes Manual.
All connectors relating to airbags will be yellow. Be advised airbags are dangerous, if you intend on disconnecting anything airbag related be sure to disconnect the battery to avoid any injury.
Try disconnecting the battery cable, then reconnecting. If the airbag light still comes on, you need to take it to the dealer. Something in the airbag circuit isn't working correctly. To fix might involve removing the airbag. I've had the airbag light come on in my car two times & I've taken it to the dealer each time. I'm leery working around the airbag. You must disconnect the battery for a min of 5 mins
No an airbag will not deploy if the battery is disconnected
Your car computer may think that your airbag was damaged, you can try disconnecting your battery cable (+ or-) for about 3-5 minutes. Reconnect and see if this fixes the problem.
Sometime after fixing problems in the car, the warning lights will stay on. These can be removed by disconnecting and reconnecting the battery, or they can be cleared out using an OBDii scanner.
The airbag code 52 on a 96 Ford Windstar often means nothing more than that there is a loose connection in the electrical system. The code can be reset by disconnecting the battery for about 10 minutes, then reconnecting it. If that doesn't work, the code may also be indicating that the airbag itself is not getting power and requires servicing.