To re-set Toyota Highlander 'maintenance required' dashboard warning light: Turn on the ignition and observe the odometer window. Ensure that it is set on the totalaccumulated mileage of the vehicle (NOT the trip meter). Turn off ignition. With the ignition off - depress the little plastic switch that changes the odometer to the trip meter and then while holding the switch in the depressed position, turn on ignition (it is not necessarry to start the car). Continue holding the switch down for 5-10 seconds and you will see the odometer window flash back to zero. Release the switch and turn the ignition off, and it will be re-set for another 7,500 miles.
I found a reset button under the dash board. You may want to look there first.
The service light indicator on a 2004 Chevy Cavalier tells its owners when to send the vehicle in for maintenance. To reset the light, unplug the battery for five seconds.
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.
Read the owners manual. It has step-by-step instructions.
Press and hold the trip set knob (inside the speedometer) until it reads 0000, and while holding it try to turn the ignition key to acc. DO NOT START the engine. The messege will clear
Yes, there is an ABS light indicator in the 2004 Toyota Highlander model.
i tryed on my car it does not work pit light still on
how do you reset change the oil light in a 2004 alero?
same as a 2005 odometer OS on turn key off hold reset turn key on loght flashes then turn off
Reset the light by following the procedure below: 1. Turn the ignition key to the "OFF" position. 2. Turn the ignition key to the "ON" position while holding down the trip meter reset button.
Set the odometer reading to total miles and not to trip miles. Now press and hold the odometer reset button in and turn the ignition switch to the on position. (Do not start the engine). After around 5 seconds of holding the reset button in the maintenance required light will go off and be reset. Release the button and turn the ignition off.
AnswerStart by making sure the odometer is on actual mileage. Turn the key "off" press and hold the "reset" button on the upper left of the instrument panel. Turn the key "on" (engine off); the maintenance light will flash then turn off. Release the "reset" button and it's done!