If the Airbag light is on, then there is more than likely a problem with the SRS. You may or may not have a working SRS. Attempting to repair this yourself can be dangerous. You may inadvertently deploy the air bag. I would suggest you take this to a professional and have it looked at. i have been working on same problem and to reset airbag module i took it to dealer but under dash above gas peddle there is a gray 2 prong connector take a wire and stick in both sides and turn key to run position and wait a few seconds and u will hear a click next to gas peddle and when u do the module is reset.If this dont work,and it didnt on mine i had to replace it.But try to reset it first cost me 90$ to find out how to reset it.hope this helps. rod0708
How do you reset the Airbag warning light on a 1995 Toyota Avalon?
The airbag light in a 1995 262 will come on when there is an airbag circuit problem. The airbag will not work right in the event of a crash unless the problem is fixed.
ck driver side airbag connecter.clear code see if it returns
To reset the ABS light on a 1995 Nissan Pathfinder, disconnect the battery for 10 minutes. A Nissan dealer can also reset the light with a computer.
This is not a do it yourself issue, when there are problems with the airbag system the light will come on and with this particular computer system when the problem is fixed the light will go out. once again, if you are not familiar with the repair procedures do not attempt to work on an air bag system, they can be very dangerous and sometimes fatal when not handled properly.
It is important to understand the meaning behind the warning lights in a car. The Airbag light being on means that there is an issue with an airbag in the car, or with the horn system in the car.
You can't "clear" it unless you fix the problem that is causing the light to be on in the first place. That's the way all airbag systems work.
press reset for tripmeter for a few seconds
The service engine light on a 1995 Land Rover is reset by connecting an OBDII code reader to the vehicle's computer. It can quickly and easily rest the light.
hoe do you reset the check engine light in a 1995 land rover
After my 1995 Montero turned 150,000 miles the
SRS is your safety restrait system probably your airbag sensors my 1992 has the same problem. the previous owner hit someone leaving damage to the front end. THE dealer should be able to reset it.
if you find the answer to how to reset the check engine light on a 1995 v6 accord please let me know. Thank you. Email me at firstname.lastname@example.org
The SRS light comes on when the airbag computer detects a malfunction and sets a code.
I have a 1995 ford windstar gl and wondering what size of tires I can get for it
how many check ball locations on a 1995 ford windstar
I am looking around to replace the transmission on my 1995 Ford Windstar and the information that I received from several different mechanics is that the 1995 Windstar transmission is a "one year" transmission so you pretty much have to get a 1995 transmission for a 1995 windstar engine. I'm no mechanic and really have no idea but this is just what I've been told... someone out!
Auto Zone or Advanced auto parts can reset the light for you. They tell you they are not suppose to but many times they will.
Try disconnecting the battery for 10 minutes. May reset the light--if problem persists light will come back on
The service engine light has to be reset with a scanner. Disconnecting the battery will not work. The light will come back on unless you make the necessary repairs.
how do you change a shaft soleniod in a ford windstar 1995 v6 3.8 engin
There is a after market tool you can buy that reset oil that connects to hardness
que motor de windstar es compatible con una 1995,sera 1996,1997,1998,1999,etc,etc Gracias
Unless you have the problem with the SRS repaired the light will just come back on. It is dangerous to work on this system so have it repaired by a professional. They will reset the light.
The easiest way to reset the check engine light on a 1995 Acura Integra is to unhook the battery for a few minutes. If the light is still on after hooking it up again, there is probably still a problem that needs to be fixed with the engine.