Turn the key to the on position (dont crank) pump the gas peddle 3 times within 5 secs lights should start blinking and then go off.
If the warning lights go off in a Chevy Tahoe, it indicates a problem. In order to reset these lights the problem must be solved.
Try turning the key to "on" position without engine running and push accelerator to the floor 6 times
Write the date and mileage on a small sticker and cover the light with it.
THE EASIEST WAY TO DO IT YOURSELF IS TO UNHOOK THE BATTERY. iF YOU DO HAVE A PROBLEM THOUGH, THE LIGHT WILL COME BACK ON.
drive it into a lake
Chevy did not use a reset / Inertia switch on there trucks.
If the original problem that caused the abs light to come on was fixed, the light will reset itself after a short drive. If the light remains on, you still have a problem with the abs system.
Turn key on ( do not start ) then push the gas pedal all the way down 3 times and then turn key off and then start the engine.
Turn key on ( do not start ) then push the gas pedal all the way down 3 times and then turn key off and then start the engine.
Chevy did not use them on there trucks.
read the owners manual
No such thing on the 95.