GM Oil Life System - Resetting
The vehicle has a computer system that has a change engine oil light, indicating when to change the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change will be indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed.
When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. The change engine oil light will come on. The oil must be changed as soon as possible. It is possible that, if the vehicle is driven under the best conditions, the oil life system may not indicate that an oil change is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset. If the system is ever reset accidentally, the oil must be changed at 3,000 miles (5 000 km) since the last oil change. Remember to reset the oil life system whenever the oil and filter is changed.
1. Turn the ignition to RUN with the engine OFF.
2. Press and release the reset button in the driver information center (DIC) until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear on the DIC display, press and hold the reset stem until several beeps sound. This confirms the OIL LIFE system has been reset.
4. Turn the key to lock. If the CHANGE OIL message comes back on when you start the engine, the ENGINE OIL LIFE system has not reset. Repeat the procedure
that is incorrect. turn the key as instructed to do so above, press and release the accelerator pedal 3 times. then you will hear the 5 beeps and this means the change oil light has been reset. pressing and holding the reset stem will not do anything accept reset the trip meter.
The reset ranch light with the oil can on a Chevy C 5500 is a warning to check the oil. It can also mean that the oil needs to be changed.
Turn key to ON position and then pump the gas pedal and it will reset oil life meter.
Turn on the key but don't start the engine. Push down and release the accelerator pedal 3 times. It will now reset.
Turn the key to the 'on' position (do not start the truck).Wait for the change oil light to come on.Tap the gas pedal 5 times.Move key to off position, move key back to on position. The change oil light should be reset.
When you first put the key in the ignition turn it to the on position but do not start it. and pump the gas pedal three times right away. Then wait about 10 seconds, then it should reset
5w30
on the engine
5 quarts
You need to reset the change oil light. Simply turn ingnition key to the on position (do not crank engine) then depress gas pedal to the floor three times, wait a few seconds and the change oil light will flash 5 times. This completes the reset.
On the Oil Pan.
Inside the oil pan mounted on the engine block.
No.