Want this question answered?
With a scan tool.
I received these error codes for my 1998 Dodge Avenger, 6cyl. 2.5 What does these codes mean? Where would I start to fix these issues? ~THANK YOU ~ P0108 P1297 P0401
You need to have a diagnostic meter to read the codes, then book to tell you what they mean.
you can find the computer codes in any haynes or chilton repair manual. you can get them at any auto parts store. or you can register at this website http://www.obdii.com/codes_request.asp and get the codes there.
I you pulled a P0700 out of the engine computer it means that you need to check the transmission computer (tcm) for codes also.I you pulled a P0700 out of the engine computer it means that you need to check the transmission computer (tcm) for codes also.
Check the fluid level and have the computer checked for codes.
You use an OBD scan tool.
With a scan tool. If a Scan Tool isn't available you can cycle your ignition switch on-off-on-off-on.....Look at the odometer and copy down the codes...
The red brake light comes on when the p brake is set, the switch for the p brake is faulty, the brake fluid level is low, or the brake fluid level switch is faulty. If the abs light is also on, you will have codes in the abs computer too for an electrical failure of a sensor or switch..
Codes in the PCM, broken vacuum line, failed switch, wiring between switch and PCM
It is end of message. It just means that the computer has finished reading codes.
P0700: EATX code present. You will need to check the transmission computer for codes.