you don't, replace the sensor as it's bad.
There is no way to reset the light. If the light is on, then either the coolant is low, the float is stuck or the sensor is bad.
Indicator lights on an Audi can be reset by a mechanic. The cars manual will also give instructions on how to reset this light as well.
There is not a reset for the break wear indicator light on the Mercedes-Benz GL450. You will need to fix the problem before the light will go off.
Well, it will no light up if you have the correct coolant levels.
You should be able to reset the low coolant light by the parking light switch 3 times on and off somewhat quickly should do it
It should reset itself when the coolant is back to the appropriate level as long as the sensor is working properly. If you look in the overflow reservoir and can see coolant, the sensor or wiring might be the problem.
reset service light on 2010 ml 550
there is no reset you have replace the low coolant sensor and flush cooling system and use dexcool coolant.
what causes the light to come on
normally disconnecting one of your battery terminals and reconnecting it will reset the trouble light.
Go get it serviced.
You do not reset it, it is a fault code. It is not a routine maintenance indicator. Fix the problem and the light will go out.