0
How do you reset the dash light indicating brake ware visit work shop?
Wiki User
∙ 17y ago
I recently change my brake pads on my 2002 C230. There is a brake sensor that you also need to change, my sales person told me that there is 1 on each wheel, NO there is Not. I think it is on the front drivers side, possible on the passenger, but I believe it is the drivers side. It is a small piece of plastic attached to 2 very small wires with a plug on it, total size under 4" long. When this sensor is changed the indicator light should go out.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What is the dash light with a circle and a exclimation mark in it in a 2000 BMW?
BMW uses several symbols on the instrument panel that have a circle with an exclamation point in it. There is one indicating that there is something wrong with the automatic transmission, one indicating that there is something wrong with the brakes, and one that means that a bulb is out somewhere. Without actually seeing the symbol, I can't tell you which one of these is on in your car. Generally speaking, if the symbol is yellow it's a warning and if the symbol is red that means you need to take the car in for service as soon as possible. Check your owner's manual for more detail. ________________________________________________________ Yeah... that symbol refers to the brake system. If the engine is on, and the parking brake is also on, the dash light will be on. However, if the parking brake is off, and the light is still showing, it means you're low on brake fluid. Nevertheless, you should pay a visit to your mechanic.
How do you reset the low tire pressure light on a 2006 Ford Freestar?
Once the pressure in the affected tire is correct the light should reset itself after a few minutes of driving. It might not reset if a sensor battery is depleted or a sensor is defective. That will likely require a dealer visit to correct.
How do you reset service light on fiat bravo 57plate?
If you buy a Fiat, you don't way to visit the concesination hay que joderse.
My service vehicle soon light trac off light anti lock light and pcs light stays on what can I do to reset these and what might the problem?
Visit an auto parts store that has the computer that will read the codes that these lights represent. Then, you will have an idea as to the problems you face. Anti lock sounds like brake issues to me and PCS (Precision Control Steering) may affect your power steering. At the least, you should check your fluid levels.
When the maintenece light comes on how do you reset it?
It means that your car is due for a service visit usually 60,000 or 70,000 miles and is meant to be reset at the dealer, however you could ask to have your codes read at your local parts store and if they have a code reader they may reset it for you.
How do you reset the check engine light in a VW Eurovan?
Visit ev_update - a yahoo group - for awesome information on all things evc-related.
Your light coms on it says brake service visit workshop it a Mercedes e 320?
It's the brake pump, once exceded the number of cycles needs to be reset or pump replaced. Mercedes has extended the warranty to 10 years from the date of manufacture. MB dealer can apply for goodwill pump replacement. Not sure about exact details but your local MB dealer should be able to answer.
How do you reset the check engine light on a 2001 VW Passat?
The easiest way is to visit a local Murrays or Autozone. Either store will perform a free diagnostic and reset if asked. Its a free service and I use it whenever my "check engine" light comes on for any vehicle.
How do you reset the air bag light on 2006 Toyota solara?
The air bag light is indicating a fault in the system. That'll have to be repaired before the light will stay off. You can visit your Toyota dealer or other shop or, visit an auto supply store that offers to loan an OBD II reader. It's an electonic box that plugs into a port under the dashboard (to the right of the steering column). The code reader will tell you what the problem is so it can be repaired. The same reader will allow the code to be cleared and the light will go off. Clearing the code without doing the repair will only result in the light coming back on again. Cheers
Why does the Brake light stay on in your Ford Focus 2001 ZX3 do your brakes need changing or what else could that light mean?
AnswerHi,It could mean that they need changing, but on my Escort when the emergency brake lever is pulled up just a notch or two, even though it's not actually engaged, the brake light lights up. Try releasing the brake lever and see if that solves the problem.Hope it helps,CubbyAnswerHi,The emergency brake lever may be engaged by a notch or two causing the light to come on. Try releasing the brake handle and see if that clears it up. If not, then it's probably time to visit your favorite mechanic.Hope this helps,CubbyHello,I also had that same problem in my 2000 ZX3, I disconnected the E-Brake Wires and the light continued to stay on and after a couple weeks of driving around i finally decided to check my brake fluid , and it turns out that the sensor that is connected to the brake fluid container will cause your brake light to come on when your fluid is low, that solved my brake light problem.Hope it helps,Brian
Secretary Clinton speak from indicating the president would soon visit that country?
Turkey
How do you repair Brake light plunger?
You don't. You buy a new brake light switch. They are not repairable. Rick I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool articles and TSB's: http://free-auto-repair-advice.blogspot.com
