answersLogoWhite
Oil and Oil Filters
Toyota Sienna
Ford Explorer Eddie Bauer
Ford Explorer Limited

How do you reset the maintenance required light on a 2004 Sienna that blinks longer at start up when oil change is due?


Top Answer
User Avatar
Wiki User
2015-07-15 19:22:58
2015-07-15 19:22:58

I was looking for this same answer and found it on another site and it worked. here is the answer. The system must be reset after the engine oil replacement. Reset the system by the following procedure:

1. Turn the ignition key to the "OFF" position with the odometer reading shown.

2. Turn the ignition key to the "ON" position while holding down the trip meter reset button. Hold down the button for at least 5 seconds. The odometer indicates "000000" and the light goes off.

Related Questions

User Avatar

The 2007 Toyota Sienna V6 has a timing chain. It does not require maintenance.

User Avatar

The computer is advising you that your oil change interval is drawing near. When the light changes to a steady glow you will have passed the factory set mileage recommended for an oil change.

User Avatar

According to the owners manual for my 2004 Sienna, all it means is that an oil change is due. You can google how to reset the light, in case the guys in the shop forget to.

User Avatar

The Maintenance Required Light is not the same as the Check Engine Light. The Maintenance Required Light is telling you that there is scheduled maintenance that needs to be performed. It may mean it needs an oil/filter change. To find out what needs to be done look at the maintenance schedule in your owner's manual.

User Avatar

The check engine light comes on when the ECU detects a problem with the emission system. The maintenance required light comes on when some maintenance is required on the vehicle such as an oil/filter change.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.