Try turning the key to "on" position without starting vehicle, depress accelerator to the floor six times
Turn off key
Start vehicle
You can reset the 2007 Avalon maintenance light by setting the oil life to 100 percent. When the oil life display is on your monitor, hold in the scroll button until it goes to 100 percent.
Hold down both buttons where you get to the oil life function, and it should reset itself to zero.
buy an american car
How do you manually reset the oil life monitor on a BMW 525i
when you have it on the message that says engine oil life xxx press and hold the clr button and it will reset back to 100%
Change your oil/filter every 5,000 miles if you use conventional oil and every 8,000 miles if you use synthetic and you drive under normal conditions. If your vehicle is equipped with an oil life monitor system then change it when the system tells you too and reset the oil life monitor. If it does not come on for one year change the oil anyway and reset the system even though the light is not on.
You can reset the service light by bringing of the oil life monitor on your display. Hold the scroll button in until the oil life goes to 100 percent. This should reset your service light.
To reset the oil life in the display press and hold down the reset button for 3 to 5 seconds. This works for the GTP. Hope this helps. "G"
Change your oil/filter every 5,000 miles if you use conventional oil and every 8,000 miles if you use synthetic and you drive under normal conditions. If your vehicle is equipped with an oil life monitor system then change it when the system tells you too and reset the oil life monitor. If it does not come on for one year change the oil anyway and reset the system even though the light is not on.
press the oil button then press the reset button hold for five seconds it will reset oil life monitor back to 100%
first you have to this when your car is not on. turn the ignition switch for power and the bottom button that has an arrow on it press this until you see reset oil life and press
Turn key but do not start engine, Push the gas pedal all the way to the floor 3 times, Then turn key off and then start engine. If you have a Driver information Center, DIC, then you reset the oil life monitor with the button with the check mark on it when the oil life message is on.