1. Turn ON the ignition, with the engine OFF.
2. Attempt to start the engine, then release the key to ON, vehicle will not start.
3. Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF.
4. Turn OFF the ignition, and wait 5 seconds.
5. Repeat steps 1-4 two more times for a total of 3 cycles/30 minutes. The vehicle is now ready to
relearn the Passlock™ Sensor Data Code and/or passwords on the next ignition switch transition
from OFF to CRANK.
Important
The vehicle learns the Passlock™ Sensor Data Code and/or password on the next ignition switch
transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the
vehicle.
6. Start the engine. The vehicle has now learned the Passlock™ Sensor Data Code and/or password.
7. With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles.
Turn the engine two seconds then leave the key in the run position for exactly ten minutes...the anti-theft security light should go from blinking to solid at the ten minute mark. Immediatly run the engine and the Passlock is reset. Good Luck!!
wait 10 minutes for the passlock system to reset for a GM vehicle.
cut the yellow small wire from ign. switch in the column up by the switch. this is the passlock wire. but will it start iwas told that it wouldnt
If you are changing it because your vehicle won't start when it is cold or humid, don't bother replacing it. Instead, you need to disable the PASSLOCK system. To find out how to do that search for "cut the white wire Saturn ion" on youtube. Good luck.
how can I reset the security system on my 06 saturn vue
fill the coolant reserve and the light should go out
You really can't turn it off. They sell bypass kits, but the passlock system has to be working in order for the bypass thing to work.
The ABS light is on because there is a problem with the system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself.
my locks are locking and unlocking my trunk is unlocking my wipers are going it keeps binging and my keys are in the house
Depends on the vehicle and manufacturer. On GM Passlock, you have to wait about 10 minutes for the system to automatically reset before you try it with the key again.
security to hamper theft. It prevents "smashing" the ignition cylinder to turn the steeering wheel
sensor is located in the ignition housing itself and can not be serviced seperatly from the housing, it must be replaced