0
How do you reset the service reminder In 02 on a 1997 VW Golf CL......The car won't start?
Wiki User
∙ 16y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you reset the Service Reminder on a Citroen Berlingo?
press and hold the milage reset button on the dash, turn on the ignition the display should start counting down, hold until 0 is reached and that should be it for another 20K
Service reset mark 4 golf?
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF. Press and hold down the trip odometer reset button (at the lower right of the instrument cluster). Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON. The trip mileage area now displays "Service OIL". If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL". When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset. The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again. Switch ignition OFF and back ON to resume normal display.
How do you reset periodic inspection light?
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF. Press and hold down the trip odometer reset button (at the lower right of the instrument cluster). Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON. The trip mileage area now displays "Service OIL". If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL". When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset. The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again. Switch ignition OFF and back ON to resume normal display.
What does a -400 service code in a 1999 230 slk Mercedes mean?
On my 1998 SLK 230, at 2000 miles before the next service is due, a wrench appears in the screen below the trip odometer at the bottom of the speedometer when the igniton is turned on. When you go past 2000 miles without servicing and reseting the maintenance service reminder, it will start counting the miles past due. -400 means you are 400 miles past due for service, most likely an oil change. When the service reminder is reset, it resets to 7500 miles until it reminds you again for the next service. If you change the oil yourself as I do, I can reset the service reminder in my 1998 by: Turn the key in steering lock to position 1 Press the trip odometer reset button and hold Turn key in steering lock to position 2 After about 10 seconds, you will hear a chime and the display will show 7500 miles Release the trip odometer reset button
How do you reset the 'service ccr' light on a 1991 Eldorado?
To reset the service CCR light on a 1991 Eldorado, disconnect the battery for 10 minutes. Reconnect it and start the car.
Where is the reset button located at on a Buick road master?
Just what is it you want to reset? To reset the oil change reminder light, turn the ignition to on but do not start the car, pump the gas three times. The indicator will blink and go off. If this is not what you want to reset, please restate the question with more particularity.
How do you reset service indicator on 57 plate Renault megane 1.4 diesel?
To reset the service indicator, start the vehicle normally. Afterwards, press the button on the end of the dashboard, and hold it in. It will begin flashing through some options, but if it is held down through the flashes, it will reset the service indicator.
How do you reset the service engine light on a 1999 Oldsmobile Alero?
turn off engine, and start again
How do you reset service light on Citroen Nemo van?
if its the new 1.3hdi stop start it needs to go to a citroen dealer, i had same problem after it was serviced at local garage, i ran it to citroen and they told me it needed a service, i explained its just had a service, and they reset it for free :-)
How do you reset the service light on a 2000 reg Megan?
In order to reset the service light on a 2000 reg Megan you\'ll need to start by turning the ignition switch to the "On" position without starting the engine. Once the service light appears on the dashboard you can reset it by following these steps: Press and hold the odometer reset button Turn the ignition switch to the "Off" position Release the odometer reset button Turn the ignition switch back to the "On" positionAfter following these steps the service light should reset and no longer appear on the dashboard.
How do you reset the change oil soon light in a GMC Sierra 1500 truck after the oil was changed?
YOU DO NOT NEED TO DISCONNECT YOUR BATTERY!! Turn the key to the on position. Do not crank the motor. After the key is in the on position, quickly push your accelerator pedal down 3 times within 5 seconds. Next start the vehicle. If you have successfully reset the maintenance reminder, it will not appear again until the next service interval.
How do you reset check engine light on Volvo XC90?
Turn key to accessory position. Press and hold trip meter reset button. Wait half a second and turn key to on position (not start) continuing to hold trip button. After a few seconds the service light will start flashing. At this point release the trip button, cycle the key and start the engine. The service light should be reset.
