Want this question answered?
Using a special clutch fan tool to hold the fan still, remove the fan nut and take the fan off of the dodge 360. The tool should be available for rental from a local auto parts.
Take belt off water pump pulley remove fan from pump (4 bolts) remove old clutch from fan install new with same bolts Put fan back on.
how to take off the clutch fan in 96 blazer,trying to change water pump?
The pulley is part of the pump assembly. I don't think it comes off. The clutch fan unbolts from there. Is that what you mean?
Hey guys, I trying to take off a fan clutch on my 2003 chev blazer and want to know if I have to remove the radiator to do it.
Does anyone know how to take off a radiator fan clutch from a 1998 Dodge Dakota 3.9 V6
You simply see if it spins freely. If it does, the clutch fan is shot! Do this while motor is turned off The fan should spin freely if the engine is cold. If the engine is warmed up, shut down the engine and check the fan. Warm, the fan should turn, but should have some drag to it.
To remove the clutch fan on a 1993 Mercury grand marquis hold the fan in place using a clutch fan tool, then remove the holding nut. Most large auto parts chains will loan you the tool.
In the fuse box behind the battery under hood,take the cover off
Hey Colma==It is a fan clutch not vice versa. It is between the water pump and the fan. Simply get a new one and it eill be easier as to how you will go about thking the assenbly off of the water pump then separating the fan and clutch. GoodluckJoe
left.....counterclock wise
Turn the large nut loose (1 7/16") by turning it counterclockwise then spin the fan and fan clutch off as an assembly. Separate the fan from the clutch on the bench.