First disconnect battery.
Remove cold air induction tub for battery off.
Take air filter lid off.
Disconnect coolant bleed hose from thermostat cover.
You may need to remove the fan with the fan shroud together. It saves removing the radiator.
Remove the four screws which retain the fan shroud.
Using the proper tool, or a long, strong flat blade screwdriver, place the screwdriver or proper tool (if you have it) between one of the retaining bolts and the water pump hub to prevent the assembly turning.
Using a 32mm spanner or big shifter, loosen the fan clutch retaining nut.
Remove the fan clutch from the water pump hub.
Lift the fan, clutch and shroud as an assembly from the car.
Alternatively, if you have the radiator out, it's as simple as undoing the four retaining bolts or nut (can't remember whether their nuts or bolts, and slide the fan assembly off the pulley for water pump. Take care so belt and pulley don't come off cos it's hard to put back on if you don't know what you're doing.
If ussure still, buy the Gregory's Ford maual. costs only 30 bucks. has everything in it including photos.
how to replace intake manifold for 1994 ford falcon ED
how do i take the fan cluch off a 89 ford ranger yo replace
there is no such thing as a 87 ford falcon There is such thing I have a 1987 ford FALCON GL (bench, colomn change) mean as LMAO And about that door take panel off inside thecar check that out.
counter clock wise will remove the fan
how do i take a belt tensioner arm off a el falcon
There is no possibility of cards fan ever take off. There is no way that the fans of cards will ever take off.
You need to have a 3/4 ratchet and a piece of pipe to slide on ratchet handle. There's a square socket in a tensioner arm, insert the ratchet into a socket, slide the pipe on ratchet hanle and rotate clockwise. This will relieve the tension off the belt so you can take it off (easier to slide it off the water pump pulley). It gets a bit tricky when you need to take it off the tension pulley, a lot easier if you take the fan assembly off the radiator first.
fan assembly is removed with special tools made to fit the fan hub.also note that the fan assembly has a left hand thread so it needs to be loosened clockwise
it is run off the PCM you dont require a code.
remove the bolts holding it to the water pump pulley, then wiggle the fan out under neath the radiator hose ( or take it off if you like) there will be 4 bolts on the front of the fan holding on the fan clutch. good luck!
The bird with the fastest take-off ability is the diving peregrine falcon. This bird can take off at over 117 miles per hour.
no