To take off the panel, first go around the outside of the panel and remove 6 screws. Two at the outside, two at the hinge and two on the bottom.
Next, there is a small pop cover under the door opening lever, take this out and remove the screw. this will allow you to take off the cover around the door lever.
On the main door handle there are two holes underneath, take a square head screwdriver and push into the holes and click the catches. This will pop off the cover on the handle. Under this cover there are two big square head screws that attached the handle to the door frame.
Once removed the door cover will just fall out.
There is a little door on the passenger side in the kick panel.
No
http://www.teamfocus.us/frontdoortrimpanelremoval.htm It even has little illustrations
with a crowbar
See http://www.myfordfocus.com/how-to/doortrim.htm
there is a fuse in the fuse panel that controls the door chime
Removing the door panels on a 2000 Ford Ranger is easy. All you have to do is snap out the old panels by unscrewing the bolts and screwing in the new ones.
Panel by your left leg, looks like an ash tray door.
Right-front passenger side in the kick panel by the door. There's an access panel there.
if you take off the door panel there will be three studs that connect the mirror to the door
to open, use WD40...or a crowbar You will more than likely have to remove the inside door panel to get to the latch mechanism and find the problem of the latch does not work. No crowbar!!!!
how do you remove door panel on 2007 ford escape