Want this question answered?
Outside Rear View Mirror..Manually operated r conventional..Modern cars has electrically adjustable ORVM's....
he abbreviation 'orvms' stands for outer rear view mirror. An electronic orvms is an electrically operated foldable rear view mirror mounted on the side of a vehicle. It's an additional tool to help a driver look for behind traffic.
You have to remove the plastic piece in the inside of the car which will expose the bolts to tighten the mirror
unbolt the mirror from the car and look inside the mirror for a bolt to tighten, don't remember if it can be tightened or not.
Cannot be tighten, replace the mirror assy..
take off the inside panel and tighten the mirror. I did it and it is easy once you get the panel off which is not so easy.
To tighten a loose side view mirror on a 2002 F150, take out the old screw and screw in a slightly larger one. It is also possible to tighten the mirror by using plumber's tape around the original screw.
Pop off the plastic cover on the back of the mirror. Then release the mirror by sliding the mirror forward. Then you can see the mirror bracket and the loose screws. Tighten the screws and replace the mirror. It takes about 2 seconds when you know what your looking for!
If it's the brackets mounting the mirror to the door, you have to take the trim off the door and tighten it from the inside.
You will need to remove the door panel of your 1997 Chevrolet Corvette. When the door panel is removed the mirror retaining bolts will be visible. Tighten the mirror retaining bolts.
* Remove the mirror trim cover from the door panel * You will see three retaining nuts check/tighten them
There should be an Allen wrench slot on mirror base