To tighten the clutch on a 1987 Saab 900, first, locate the clutch cable adjustment at the firewall or near the clutch pedal. Loosen the lock nut and turn the adjusting nut clockwise to increase tension in the cable. After adjusting, ensure there is a small amount of play in the pedal before tightening the lock nut back in place. Always test the clutch engagement after making adjustments to ensure proper function.
well more than likely the clutch isnt going in all the way. you should try to tighten it.
any information on 87 Honda accord with the clutch/
To work this out you have to do the sum of 87 divided by 900% The answer would be 96%
its on the backm of the clutch pedal its about 2 inches long
No
yes
What bolts? Usually with some sort of wrench!
Is your clutch pedal depressed? If it is, check switch on clutch pedal.
Impossible to answer. All depends on the way its driven.
on the bottom of the clutch arm going into the tranny it looks like a little nipple like a brake bleeder screw
There is a switch that gets engaged when you press in the clutch pedal. It's located just below the clutch master cylinder.
http://chinozie.googlepages.com/Supra_MA70_Wiring_Manual.pdf Look on page 23.