just go to autozone and buy new ones would be easer then having them turned
Possible wrong rotors???
When Brake Rotors Are To Thin To Turn On A Brake Lathe To Have The Minumn Thickness. They Need To Be Replaced.
Your problem very well could be the hazard switch. i have a 1994 honda civic too i found whenever i disconnected the hazard switch from the wiring harness my turn signals brake lights and of course hazards do not work. Maybe replace the hazard switch..
Is the brake fluid level LOW in the brake master cylinder in your engine compartment ? If the brake fluid level is LOW that will turn the brake light on in your dash
You can turn on the passenger airbags in a 2014 Honda Civic EX by switching on the fuse under the hood.
Your Honda Civic VTEC Turbo may fail to turn on due to wear on your Turbo.
.To remove score marks or other distortions
Honda dealer.
Typically, I would say about 2mm. That's when I replace the pads on my cars. That gives you a safety margin. Pads are cheap; your life isn't! When you replace the pads, inspect the rotors as well. If they are deeply scored, replace them as well. I don't like turning rotors,; there is a lot of disagreement on whether to do so or not. Many auto parts stores will turn them very inexpensively.
If a 1997 Honda Civic will not star there may be an issue spark. When there isn't enough spark to ignite the fuel the car will not turn on.
The turn signal flasher on a 1986 Honda Civic is located on the cabin fuse box. It will be plugged into the fuse box and its backside.
Remove your 1998 Honda rear window brake light cover. Push the light bald in and turn at the same time. The light bulb will come out. Reverse the process to install the new light bulb.