turn key to position 2 about 5 times you will here central locking click when it clicks press your remote any button that's it re-programed
Hold down the lock and unlock buttons, on the key fob, together for several seconds and the system will change to lights with horn.
Matching instructions for the Clarion 1993 to 1999 banjo style remote. Using 2 keys, put one key in the ignition, turn the igniton on, do not start the car. Close the door, put the 2nd key in the door lock, turn the key to the unlock position and hold it untill you hear the alarm horn chirp, release the key. Press any button on the remote, you should hear a chirp from the alarm horn, press button on the 2nd remote, you will hear two chirps, 3rd remote will chirp 3 times, and the 4th remote will chirp 4 times, then lock the door with the key. Unlock the door, remove the key from the ignition, close the door and try the remote. You can match any remote to any car. You teach the car to respond to each remote. www.watercooledkey.com
Reconnect your horn and turn your key to unlock the door this will disable your alarm.
no fuses, just get in the car. turn the key to acc. push the lock/unlock button the the key remote once. that should do it.
I have a 2000 sportage 4x4 and somtimes my horn starts honking and the sidemarkers start blinking. it is the alarm system. mien is caused by the pasenger door lock not locking all the way. I just diconectied the horn's. I really dont know how to fix the problem exept by changing the locking mechinasem
If it is a remote for locking and unlocking doors; with doors all closed, turn ignition switch on and off 5 times within 10 seconds, then press one of the remote buttons within 10 seconds. A small red light will illuminate if remote is working.
Yank it's fuse.
I've heard that you put y The key in and turn ignition on but not start, wait 10 mins, the horn will honk, within 5mins turn the key of then, back to on, wait 10 mins, horn will honk, turn off then, turn key to on, wait 10 mins, horn will honk, turn key off. Security light should go out and you should be able to start your car, also after starting, check for functions on remote key. Do not wait a long intervals when starting these procedure I.e.. After horn honks , immediately turn key off, wait just a couple seconds, then turn key back to on position. Good luck!
You turn the key to the ll position or second click and press the remote pad to open the car. The central locking and indicators for the immobilizer should activate and that is the key programmed. Hope this helps.
I just bought a replacement remote at www.keylessride.com . It was $45 plus tax and came with free programming instructions. The dealership was going to charge me $80 to program. My 16 yr old son and I programmed it in less than a minute. Matching instructions for the Clarion remote 93-99. Using 2 keys, put one key in the ignition, turn the igniton on, do not start the car. Close the door, put the 2nd key in the door lock, turn the key to the unlock position and hold it until you hear the alarm horn chirp, release the key. Press any button on the remote, you should hear a chirp from the alarm horn, press button on the 2nd remote, you will hear two chirps, 3rd remote will chirp 3 times, and the 4th remote will chirp 4 times, then lock the door with the key. Unlock the door, remove the key from the ignition, close the door and try the remote. You can match any remote to any car. You teach the car to respond to each remote. www.watercooledkey.com
With the vehicle door open start the engine. Press the valet button on the viper remote. One press is for alarm, two is trunk, three is remote start. After the system chirps, press the feature that you wish to program. Push valet to end programming, turn ignition off to complete the procedure.
The foam rubber in the horn pad in the center of the steering wheel is discentergrated -(bad even) some times U can just slip a small piece under the pad instead of buying the whole thing. The contact for the horn is located in the steering column, just above the turn signal controls. It is likely that one of the contact wires for the horn has broken off and makes contact with either the steering column or the locking plate when you turn the wheel.
you have to turn it on by remote
Supposing you have a remote to control the light, the remote for the light and the remote for the TV are probably on the same frequency.
There really is only one way to turn off the air horn in a truck. You need to disconnect the horn.
You have to have a remote
if yopu have replaced battery in remote key fob put key in ignition then turn to postion1 the press the buttons on the fob a few times this simply resets the fob to the car then alll will work as should do
Using the remote is like having two switches in series. Both switches have to be on at the same time. Do not use the remote to turn off the fan when you want to turn the fan off with the wall switch.
with a remote.. dhaha
with a remote.. dhaha
Try putting the key in the driver's side door and locking and then unlocking it. It works in my 2001!
The problem is the horn ring under the steering wheel, not the horn.
The wiring for the horn goes from the horn to the relay then to a box located unde the dash which in turn connects to your horn pad on the wheel in the car
Just pull the trigger