Yes I need the code
There are wheel speed sensors on each wheel. These sensors are also used to determine if the wheels are slipping by the traction control computer. As a tire loses air pressure, the diameter of that tire decreases and the wheel turns faster in relation to the other wheels. The car's computer detects the difference in the speed signal sent by that sensor. It takes a change of about 10 pounds of air pressure or more, to be detected. A warning is then displayed on the dash panel. Charles White 98 Ultra
Special wheel - speed sensors measure each wheel's rotational speed relative to the other wheels, allowing the system to detect low pneumatic pressure in tires. Once under - inflation is detected, a visual warning will alert the driver.
The sensors are part of the factory valve stems. If the factory stems will not work in the aftermarket wheels there is no way of turning the light off.
normally caused by damaged wires or sensors on one of the wheels check the wiring around the sensors on each of the wheels it might be as simple as re joining the wires after that you probably need to take it to a garage should not cost much to get checked but the sensors can be dear but your better off getting it checked
What year? They vary greatly
There are transmission speed sensors on the transmission and abs speed sensors for the wheels. The speedometer signal comes from the abs system.There are transmission speed sensors on the transmission and abs speed sensors for the wheels. The speedometer signal comes from the abs system.
Will 97 maxima rims fit 09 corolla
Check Tire Pressure. If correct, check that the factory pressure monitor installed on stock wheels is still good.
Yes
No, it will not.
There are four wheel sensors, one for each wheel. They are located in the original valve stems. These sensors are for the tire pressure readings on your display in the dash.
The factory sensors can be installed into most wheels.