answersLogoWhite

0


Best Answer

Ok according to my 2004 GM Owners Manual. If you are speaking about the light that looks like an "Oil Can". * The light goes on when you turn your key to ON or START. It goes off once you start your engine. That's a check to be sure the light works. If it doesn't come on, be sure to have it fixed so it will there to warn you if something goes wrong. * When the light comes on and stays on, it means that the oil isn't flowing through your engine properly. You could be low on oil and you might have some other system problem. Check the oil level and make sure you put in enough. If you are asking about the "CHANGE OIL" message that GM vehicles display on the dash then the steps to reseting that according to My Manual are. * The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL message being turned on, reset the system. * Always reset the engine oiul life to 100% after every oil change. It will not reset itself. To reset the CHANGE OIL message, do the following: * 1. Display OIL LIFE on the DIC. * 2. Press and hold the reset stem. The oil life will change to 100% and a beep will sound. * 3. Turn the key to LOCK. * If the CHANGE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. Good Luck and Remember.
Change Your Mind, Not Your Oil.
Use the First In Synthetic Motor Oil's.
See My Bio For more information. There Can Be 3 Methods, Method 1: Turn Key To On Position, Do Not Start, Pump Gas Petal 3 times in 5 seconds, Now Start The Vehicle, if Light Remains, Try Again Or Different Method Method 2: Check And See If You Have A Fuse Box Located On The Dash Next To Your Door, if so commenly There is a Reset Button On The Fuse Box, Press That Untill You Hear a Chime, Should Chime 3 Times and it Will Reset. Method 3: Is Threw The Radio, I Dont know Too much about this, and i have to read the owners manual every time, seams different every time

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you turn off the oil light that remained on after an oil change on a 2004 Oldsmobile Alero?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Dash lights on Oldsmobile alero?

brake light on when driving oldsmobile alero


What do the dash light indicators on your 1999 Oldsmobile alero mean?

what does the engine light on the 1999 olds alero mean


Will a wheel bearing set off a low tire pressure light in a 1999 Oldsmobile alero?

No, a wheel bearing should not set off a low tire pressure light in a 1999 Oldsmobile Alero.


How do you reset the change oil light in 2004 alero?

how do you reset change the oil light in a 2004 alero?


How do you remove abs light hand brake light onto Alero?

You can remove the ABS and brake light, from your Oldsmobile Alero, by removing the dash cover. The light retaining nut must be removed. The light will come out.


What is the bulb replacement number for a fog light on a 1999 Oldsmobile Alero?

894 for Sylvania.


Location of fog light fuse 2003 alero?

On a 2003 Oldsmobile Alero, the fog light fuse is located inside the dashboard fuse box on the right. The fog light fuse is a ten amp fuse.


What to do when the service engine soon light comes on - 2002 Oldsmobile Alero The reset button is for oil change tire pressure low Thanks?

Have vehicle scanned to determine the problem


Engine light comes on when misfiringona 2002 Oldsmobile Alero?

It should, yes. That would be normal operation.


What are the causes of brake light not working on a 2001 Oldsmobile Alero?

you either have a blown bulb or you have a broken wire


How do you reset the service engine light on a 1999 Oldsmobile Alero?

turn off engine, and start again


Why would an anti-lock brake light be on on a 2001 Oldsmobile alero?

because there is a problem with your anti-lock brakes