Go to www.the12volt.com They have an excellent schematic on how you do it with a couple of stadard relays.
The easiest way to get them to come on is to tap into the wiring harness of the parking lights.
There is a switch especially for the foglights under the dash towards the driver's side door left of the steering wheel. The foglights will come on only if the low beams or the park lights are on. When you change from low beams to high beams the foglights will go off. Also when you turn the car off the fog lights go off too.
there not foglights there spotlights that come on with the main beam
they do not come stock with forged pistons, no probe gt does. You will have to buy them and install by yourself
Your idle air controle valve.
you can install a relay or rewire to a switched FUSED 12v source such as your parking lights they will come on when ever the parking lights are on i did the 2nd option worked great probe the wires to the back of the parking lights find the one that only carries current when switch is on
absolutly NOT
hit the tire with a mallet dont hit the rim it might damage it
I have a 1993 mark 8' while putting in a radio I blow a fuse on the radio replace it and put everything together and nothing come back on.
Because the radio is wired into the headlight circuit instead of the accessory circuit.
"Cornering" lights - as they only come on when the turn signal is active, which *usually* means you'll soon be turning the corner ;) See "Related Questions" below for more
There are a couple of reasons why a 1993 Jeep Wrangler tail and brake lights may not work. The light bulbs may be blown or a fuse may need replaced.