Chevy Camaro
Chevy S-10
Ford F-150

How do your bleed a slave cylinder on a 1995 3.4 liter Chevy camaro standard transmission?

91011

Top Answer
User Avatar
Wiki User
Answered
2006-07-28 06:39:19
2006-07-28 06:39:19

just bleed it like you would your brakes, the bleeder valve should be right on it, you could replace it with a speed bleeder to make it easier, or use a vaacuum pump

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


Need to know what year and if it is a standard or automatic transmission.


Probably in the 15 mpg range depending on automatic or standard transmission.


you can install an automatic transmission, but i wouldn't try one from a v6 unless your motor is a v6 as well


Where is the fuse for the computer for 1996 Chevy camaro rsmanual trans 6 cylinder


the car is a 82 Chevy camaro and the other is 91 Chevy caprice classic


A 1991 Chevy Camaro with a manual transmission needs Dexron II ATF fluid. It provides lubricant and cooling to the transmission.


The 1996 Chevy Camaro automatic transmission has a fluid capacity of 7.3 quarts. You can check the automatic transmission fluid level with the transmission dipstick.


i have a 97 Chevy camaro i need to know what kind of transmission came in it



the 82 is a 4 cylinder. also the 77 convert. is 4 cylinder. hope you find what you looking for



Yes it will. GM. put alot of V8 engines in that year camaro.


The automatic, Dextron III. The standard shift, Mercon.


You will have to remove the transmission and torque converter from the car to get to the front seal.



Some are standard and some are metric. Lug nuts are standard and most others are metric.


Add it in the transmission dip stick tube.



Depends on the engine, transmission, gearing, etc...


Begin by loosening your 1991 Chevy Camaro transmission mount bolt. Jack the transmission up a few inches. Remove the transmission mount bolt and the transmission mount bushing. Put the new transmission mount bushing in and reverse the process.


Does it have an automatic or standard transmission? That is the first question..


If you mean, do they make the Chevy Colorado with a manual transmission, the answer is yes; the standard transmission in a base Colorado is a 5-speed manual.


I have a 1998 S-10 2.2L 4 cylinder with the standard 5 speed transmission and it gives me 29 mpg highway.


Sure, preferably a short tail TH 400 with the Chevy/Buick bolt pattern.


Standard cab with a 4 cylinder engine and automatic transmission is rated at 5600#. Standard cab with a 4.3 V6 engine and automatic transmission is rated at 6000#. Extended cab with 4.3 V6 engine and automatic transmission is rated at 5500#.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.