0
It's generally a ballvalve that moves across both hot and cold inlets and combines them into one output to the shower. More sophisticated versions have anti-scald and other improvements.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Can you change from tub spout diverter to diverter on the control?
NO - you would have to change valve out
What causes shower diverter to be loose or leak?
The shower diverter is loose or broken inside and needs to be changed.
How do you lay out a tubshower?
This is clients preference, it also depends on what materials are used as well as the set up of where the tub shower will be installed.
When you cleaned price pfister showerhead and diverter and faucet why did diverter stop diverting?
You possibly refitted something the wrong way.
Where is air diverter for 2004 Chevey Blazer located?
Where is diverter that controls air direction located in a 2004 Chevy S10 Blazer?
Why does the ac only work on passenger side while heat is on and blowing on the drivers side?
The actuator that controls the diverter door needs to be replaced.
How do you replace a shower diverter in a mobile home?
If you are simply replacing the inside parts of the diverter, then you do it just by unscrewing the cap under the handle and pulling out the main ball. If you cannot get the same parts,which may happen if it's old, then you will have to fit an entire new diverter. If you are removing the entire diverter then you must remove enough of the tile etc, and wall to expose all connections. I have done a few and generally cut all 4 pipes about 6" away from the diverter. I then fit the new diverter in place and make the pipes meet the diverter with short sections of PEX joined to the old pipes with brass compression fittings, and to the diverter with PEX MIP fittings.. Test thoroughly before restoring any parts of the wall. Once you are certain it all works perfectly you can restore the wall and tiles.
What is the air that is drawn into the draft diverter called?
Heat
Will too much water pressure to the house cause the shower diverter valve to not work properly?
You should not really have over 80 pounds of pressure. But a lot of people do. NO -- even with high pressure it should work ok
Why would just the kitchen faucet sputter when first turned on and no others?
If this faucet has a spray hose, turn on the faucet and open the spray hose.This will adjust the diverter in the kitchen faucet to the spray and pressureize the hose.This will allow the faucet to equilize and the sputter will stop if the spray diverter is working. It could be that the diverter part in the faucet is defective.
How do you get the shower diverter stem out of the tap casting on an Indiana brass shower diverter?
vnthe Indiana tub faucets i have here on the diverter stems they have two flat sides on them and there is a special socket to remove that stem i got mine from a company called wil-mar once you have the tool the stem will come right out and there are two washers in there to replace
How much should you pay a plumber to install a shower diverter?
$350
