Water based or PVA adhesives work very well on wood as they need to soak in and then dry to form a strong joint. This process works well with the structure of wood.
The wood manufactures almost all universally say no. Generally they recommend a wood cleaner that is based with alcohol. Bruce makes a good cleaner as does Orange Glo. There are others out on the market that work well, but make sure it isn't based with water. Often it will say safe for wood, but contain large amounts of water.
it burns the wood
No, wood floors should have no steam products used on it. These will cause damage to the floor even if they are polyurethaned.
The best way is to use water only to keep from getting buildup on floors. occasionaly you can use a little vinegar with the water. I have tried everything to get my floors clean. I didn't like orange glo so I recomend not to use it It may work for you but not for mine.
Coopers worked with wood and iron making barrels.
Water based or PVA adhesives work very well on wood as they need to soak in and then dry to form a strong joint. This process works well with the structure of wood.
It will work on some. On glues that are harder to remove, try 'Whitlam's Glue Wash' hand cleaner.
You " CAN ", but it is not advisable!AnswerSand the painted area so that it is rough. Then the adhesive will work better.
How you can get a wood stain out of a white t-shirt depends on whether the stain is oil or water-based. For oil-based wood stains, use mineral spirits and for water-based wood stains, use acetone. Blot the stain from the edges and work your way in towards the middle but do not rub. Wash the t-shirt on a hot laundry cycle, between 60 and 90 degrees.
Seasoning of wood is removed of water and moisture in wood
The wood manufactures almost all universally say no. Generally they recommend a wood cleaner that is based with alcohol. Bruce makes a good cleaner as does Orange Glo. There are others out on the market that work well, but make sure it isn't based with water. Often it will say safe for wood, but contain large amounts of water.
That depends entirely what the adhesive is. Without knowing, I would suggest fist wiping with very hot water, if that doesn't work try Goof Off. If you give more information, especially WHAT kind of adhesive it will get you a better answer.
Water, wood, and plastic are all non-magnetic. Magnets will not attract them.
A hot water washing seems to work on my T shirts. If this doesn't work, try Goof-Off.
Goo Gone will work on most adhesive residues. It's a citrus based solvent and seems to work on most clothing and many other surfaces.
Yes, 3M adhesive remover will work to remove tape residue on your refrigerator. It is made to remove any kind of adhesive, tape, stickers, etc. on any surface.
About how water was made?