answersLogoWhite

0


Best Answer

I'm not sure if this will help but heres what I have on power windows. lower window to down position(if you can) remove door panel remove window weatherstripping remove black window surrond(should be a screw on top of surrond towards back edge) then stationary window should unbolt then remove pins that hold operator to track pick up and pull out the operating window

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How does one access window lock switch on 1997 Jeep Cherokee?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the power window relay in a 97 Cadillac STS.?

The 1997 Cadillac power window relay switch can be found inside of the drivers side door. You will need to remove the inside door panel in order to access the power window relay switch.


How do you fix a window regulator on a 1997 Buick Riviera?

If you are changing the switch, the job is very easy (I did it with out a problem). You just take the door card off from the inside which will give you access to the switch.


Where the one touch window relay is located on your 97 mark viii?

The 1997 Lincoln one touch window relay switch can be found inside of the drivers side door. You will need to remove the door panel in order to access the relay switch.


Why won't the power window go down on a 1997 Mitsubishi Eclipse?

the window switch is bad


Does a 1997 jeep grand Cherokee laredo have a fuel pump shut off switch?

No.


Where is the kill switch for alarm on 1997 pathfinder?

put key in back window


What year power window switch will fit your 1997 Monte Carlo?

1995-1999


Where is the fuse to your headlights for your 1997 Jeep Grand Cherokee Laredo?

Most headlights are not fused they are wired direct thru the headlight switch... Is your switch bad??


On a 1997 Chevy Monte Carlo how do you get a power window up if the power window switch is broken?

You can either replace the switch or temporarily, jump across the connections. This will move the window to the up position. Better answer.... The switch needs to be plugged in, in order to jump the connections. Remove the plate that cover the inside handle, unplug the power door lock. Now you have access to the underside of the window switch. Unplug the switch and pop it out (pry the lock tabs in). Remove the bottom white plate off the switch. This gives you access to the conncetions. Look at the wire harness plug, it has letters on it, A, B C D on one side, E - H on the other. With the white plate off, plug the switch back into the wire harness. Jump E - H (blue to light tan wires) with the ignition on). Be carefull not to hit anything else. I used electrical tape to protect the inside of the switch. The window will rise. And then onto E-Bay to buy a used switch.


Does a 1997 Mercury Cougar have a emergency cutoff switch?

There is an inertia switch / fuel cutoff switch in behind the trunk liner , on the left side of the trunk ( there is an access hole )


You have a 1997 gmc jimmy the drivers side window switch will work all the windows but the other 3 window switches will not work what do you check?

I found that there is a normal and lock switch on drivers door and lock stops use of the windows.


Why are the lights flashing on my 1993 Jeep Grand Cherokee limited?

I had the same problem with my 1997 Grand Cherokee and it was the dash mounted automatic light switch. The problem was also solved by turning the headlamps on manually.