answersLogoWhite

0

How does power get to coil on gm?

User Avatar

Anonymous

17y ago
Updated: 8/16/2019

Primary wire comes from ignition key to hot side of coil.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Who used Coil on plug first?

gm What make and model? I believe GM is incorrect.


1990 Mitsubishi Valant Power transferrs to the coil but coil is not transferring power If the coil is getting power why is there no spark?

The coil is bad or the ignitions system is grounding out somewhere.


Where is coil pack on gm 3.1 V6 engine?

there are 3 dual post coil packs underneath the front exhaust manifold.


How does a power mat for an Android device work?

The primary coil is in the power mat while the secondary coil is in the Android device. Power goes from the primary coil to the secondary coil, which allows the phone to charge.


How many coil packs are on a 1990 Z24 3.1?

There are 3 coils on all 3100 gm


1991 Dodge Dakota that won't START - I have already replaced the pick-up in the distributor and coil and coil wire you have power to the coil but there is not power coming out of the coil - help?

Replace the ECU.


Why does 1998 gm cut out but shows no code?

Ignition coil? Fuel pump? Check for fuel and spark


What kind of power steering fluid do you use for a 2000 grand prix?

Standard GM power sterring fluid available at GM dealers.


Can you put power steering fluid in a gm vehicle instead of actual gm brand fluid?

Yes. Power steering fluids are interchangeable.


What causes no power to coil pack in 98 dodge stratus?

What causes no power to coil pack in 1998 dodge stratus ?


How to calculate power consumption by induction melting furnace?

simply by measuring the coil voltage, coil current & power factor.


How do you replace pickup coil gm?

To replace the pickup coil in a GM vehicle, first disconnect the battery and remove the distributor cap for access. Next, carefully remove the retaining screws or clips holding the pickup coil in place, disconnect the wiring harness, and take out the old coil. Install the new pickup coil by reversing the removal process, ensuring it's properly aligned, and reconnect the wiring. Finally, reassemble the distributor cap, reconnect the battery, and test the ignition system.