If you have to ask, then you shouldn't try it.
Not in the vacuum line.
three hoses that run from the top of the tranny down around the tranny and then back up to the engine
how much should it cost for tranny flush on 1995 s-10 Chevy blazer 4x4 4.3lt vortec
There should be a black metal tube behind the engine with a pull ring. It's easily visible. Just need a funnel to fit in the tube and pour e tranny fluid in.
Find help here: http://www.syty.huryde.com/html/trans/Tranny%20Rebuild.pdf
transmission- 80-90w gear oil transfer case - atf tranny fluid
There are many types of 4x4 rims that are suitable for a Chevy Blazer. The 4x4 rims that are suitable for a the vehicle known as a Chevy Blazer are the Capital Factory Wheel rims.
NO it will not.
yes but u have to change the tranny to and take out 4x4 or you can buy exspensive adapters to keep the tranny and 4x4 stock Where can i find the adapters?
no you will have to remove the radiator to move the engine away from the input shaft of the tranny and unbolt the bellhousing. Though it will be alot easier to remove the tranny with the engine on those. i just recently pulled my 4.3 out of my 88 blazer 4x4 and put in a SBC and it took forever to put the top belhousing bolts back in. If i ever have to do it again i will be pulling them out as a unit. Prepare to be turning that wrench for a long time.
i am looking for a diagram of the firing order in a 1997 Chevy s10 blazer 4x4.
Will a 2000 blazer transmission fit a 1998 s 10 chevy 4x4 truck