Depends on what you know.The engine needs to be raised as high as in can.this is especialy hard when on the ground because you cannot jack up on the pan.Once you get it up,its a little tricky but you can wiggel it out.
lens cover is very hard to pull off, I don't want to break it, is there somethind I am doing wrong?
I have a 2001 2.7 L Intrepid and it takes 4.5 quarts
it's actually fairly easy. there are screws where the speedometer is and under the dash. remove them and the front part of the dash just drops. now the kit for aftermarket installations is hard to find for a 2001. the kit i used was for a 2000 intrepid. fits perfectly.
Check the clutch plate or have it checked.
With the proper tools and information it is not a hard job.
It should just pop in and out of place with plastic clamps, Sot you should just be able to pull gently but not hard enought to break them
dont have a clue :)
The shift cable has failed.
not hard at all,you will need a spring compressor
this sounds like a problem i had on my 2000 you need to look into having the shifting cable replaced. some of the late 90 models have had a recall on the shifter and if you are in that recall, you can go to a dodge dealer and they replace it for free, that was my case.
there is a plug on the bottom of the radiator The drain plug is on the lower passenger side of the radiator. It is very hard to get to. It is easier to just remove the lower hose.
I find out the hard way, and the best way to do it is by removing the mechanical fan first, which also is going to take some skills and patience, but is possible.