answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How long should it take for oil based stain to dry when put over satin finish paint?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What type of paint is best?

Water based paint with a satin finish. This paint type looks the best on interior walls, in my opinion. The water based paint makes for easy clean up as well.


Can satin finish paint be used on top of eggshell paint?

Yes, as long as the surface is free of dirt, wax and grease, and the eggshell and satin are both the same type, ie latex or oil, then you should have no trouble at all painting a satin sheen paint over an eggshell. Also, if the base is water based and the topcoat is oil, that will work fine too.


What is the difference between satin and semi-gloss paint?

Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.


What is the difference between gloss and satin?

Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.


How can I reduce the sheen of an oil-base paint before it is applied?

Just use satin finish paint.


Can you use eggshell paint on exterior wood?

No, because eggshell paint is intended only for indoor use, like kitchens or bathrooms. For exteriors, use paint with a satin finish.


What is satin finish paint?

Satin finish is somewhere between matte and glossy as far as the amount of shine the paint will have when it's dried. It has some sheen to it, but it's pretty subtle so it won't usually overwhelm the room.


What is the difference between semi gloss and satin paints?

Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.


What the different between satin and semi gloss?

Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.


Is acrylic paint a Matt finish?

Acrylic, like enamel paint, can be matt, gloss, or satin finish. Please see the related link below.


Should I use glossy or flat paint for house exteriors?

Many would say that a semi-gloss, flat or satin finish would be best for a houses exterior. The semi-gloss is suppose to be the easiest to clean later on. The flat or satin finish paints, do not have reflective shine when dry.


How do you prep walls that have been painted with a satin finish paint if you want to paint again with a satin finish paint?

The paint finish doesn't significantly change the surface preparation necessary. If the paint is the same type (water based going over waterbased or enamel over enamel) then the preparation is simply: * cleaning, * remove loose material, * fill any holes or hollows, * sanding and * wiping, If you are changing the type of paint (eg: painting waterbased over enamel) you may need to use an etch primer to "key" the surface and give the new paint a texture to grip onto after sanding, and otherwise prepare as above.