I assume its the 2.4l model.I would give myself 2 full days to do this as the water pump is driven off the timing chain and you have to remove a lot of components to do it.Also watch the timing is put back correctly.The timing chain tensioner must be checked ok.I think the engine was designed on computer and someone forgot the water pump!
AnswerIf the engine is the 3.1L V-6, the water pump is driven by the serpentine belt. Replacement is easy if you get the free serpentine belt tool from your autoparts store. This tool allows you to relax the tensioner to get the belt off safely and easily.HOWEVER--if the water pump froze up and the serpentine belt BROKE, then you have to replace the belt and the tensioner. (The tensioner pulley will have been chewed up when the belt was agonizing over the frozen up water pump.) Replacing the belt is a task and a half. See other inquiries about this. Allow two days if a novice, a full day if you have done it before.
6 hours
How long will it take to replace a belt tensioner unit and serpentine belt in a lexus 1996 sc300?
4 days
There is not enough water in all the rivers to replace the water in the oceans.
Since 1996
2 hours.
I would replace the bumper cover. They are very flexible and any attempt to repair will probably not last long. There are several places that sell aftermarket oem replacements for around $140
yes as long as it is the same size engine
Yes, as long as they are both 4T65E transmissions they will easily replace each other, everything is the same.
Yes. Not for long. The water pump, and alternator are driven off of the serpentine belt. If you remove it, your car will prolly die from lack of electrical power before it overheats. If you are removing it because of something not there, I.e. A/C Compressor you can buy a shorter belt for the non-A/C model, or you can get a "dummy" idler pulley to replace it.
The water erosion from the river formed the Grand Canyon over a very, very long time.
45minutes