What pressure is available? What size orifice , How long are people in the shower? 1 minute or several hours? This question is like asking "how fast can a car go" without knowing HP etc..
The volume is 23,430 cubic inches which would require 101.4 gallons to fill.
300 gallons
3.246753 gallons
A square foot has no volume. if you are asking how many gallons are in a cubic foot the answer id 7.4805195.
100 sq ft equals 748 liquid gallons.
300
Most newer shower heads restrict water flow to around 3.5 gallons a minute max. . .this would equal around 35 gallons for a 10 minute shower
It's over 9000!
it depends how long u take in the shower kkk
Most modern shower heads (U.S.) are restricted to 2.0 gallons a minute or less, so a ten minute shower would use approx. 20 gal.
Usually about 2.5 gallons per minute
There is no relationship between millilitres and a shower.You are possibly asking how much water does it take to shower, in that case- the average shower head discharges about 1.5 - 2 gallons of water per minute.
15 gallons
If u shower for 10 mins. its 50 gallons. Every min. is 5 gallons.
Aim the shower into a bucket. Let it run for one minute. Measure how much water that has collected in the bucket. Now you have the flow per minute. Next, time yourself when you take a shower. Multiply the minutes spent showering with the flow rate to find the total amount of water used.
About 1.25 gallons per minute.
depends on your shower and shower head. If you are using a standard single shower head, in California the shower heads have regulators installed so they do not allow more than 2 gallons per minute, and some areas that is even reduced to 1.5 gallons per minute.First, you must find the gallons per minute (GPM) of the shower head. (You can request a "flow bag" from your local water agency/supplier) Follow the directions on the bag to measure the gallons per minute. . Most showers range from 2-4gpm. If you know your flow or gpm, then you can simply find how many gallons are used in a 10 minute shower. GPM x minutes. This would be a GREAT exercise for an elementary student since the math is relavent.what if you are 10 and you have to do this for school homework!For those of you who do not wish to measure your shower's gpm, the National Standard in the US is 2.5 gpm, and nearly every shower head available in stores complies with it (though some with a lower flow rate are available).ANS 2 - A 10 minute shower will use 25 -30 gallons of water.Most standard shower heads use 2.5 gallons of water per minute. That would mean in a 10 minute shower, you would use 25 gallons of water. Low-flow shower heads are available to cut down on water consumption and still provide a comfortable shower. There are models available that use 2.0 gallons per minute, and even some that use 1.5 gallons per minute. You can use an internet search to help you find an affordable low-flow shower head so you can do your part in conserving our natural resources.20 -24 gallons.