Amount of sodium sulfate required = 0.683 x 350/100 = 0.239The formula mass of sodium sulfate, Na2SO4 is 2(23.0) + 32.1 + 4(16.0) = 142.1
Therefore mass of sodium sulfate required = 0.239 x 142.1 = 34.0g
Approximately 34 grams of sodium sulfate would be needed.
A solution of ammonia can be used to prepare ammoniumsulfate by reacting it with a solution of sulfuric acid to produce a solution of ammonium sulfate, which can be dried if desired to prepare solid ammonium sulfate.
It is recommended to prepare ferrous ammonium sulphate solution in acidic medium because iron when combined with water gives the precipitates of oxides of Iron.
By electrolysis
It will darken the copper (II) sulfate solution.
V1M1 = V2M2(x ml)(2 M) = (100 ml)(0.4 M) x = 20 ml Take 20 ml of 2 M magnesium sulfate solution and dilute to a final volume of 100 mls.
Dissolve the necessary quantity of copper sulfate for your desired concentration in water under stirring. For weighing be aware that copper sulfate may be anhydrous or hydrated.
A solution of ammonia can be used to prepare ammoniumsulfate by reacting it with a solution of sulfuric acid to produce a solution of ammonium sulfate, which can be dried if desired to prepare solid ammonium sulfate.
The pH of a copper sulfate solution depends on its concentration. Typically, a 1% solution of copper sulfate has a pH of around 3-4, making it acidic.
For starters, you know that 0.05000-mol L − 1 solution of copper(II) sulfate contains 0.05000 moles of copper(II) sulfate, the solute, for every 1 L = 10 3 mL of the solution.
5.50
1.5 moles
It is recommended to prepare ferrous ammonium sulphate solution in acidic medium because iron when combined with water gives the precipitates of oxides of Iron.
Sodium sulphate increases the concentration of sulphate ions. So strontium sulphate solubility decreases.
Depends on the length the light traveled through the solution and the solution concentration. molar absorption = absorbance/(length x concentration) length is typically in cm and concentration is typically in mol/L
By electrolysis
Ferrous sulfate or Iron(II) sulfate and Hydrogengas.
It will darken the copper (II) sulfate solution.