No, the voltage rating should not be exceeded. However, you could use a 250v 10a fuse for a 125v 10a fuse.
watts = volts X ampsSo240V X 10A = 2400W - not 2500.
Rr t/lps its a 10a fuse
It depends on how many amps it was designed for. A 12.5kV/600v 10kVA 3 phase transformer can handle ~.5 amps on the primary and ~10A on the secondary. A 600/120V 10kVA 3 phase transformer can handle ~10A on the primary and ~50 on the secondary.
On my 1993 (Right and Drive) Accord Coupe the fuse is located under a panel next to the bonnet (hood) release handle which is in the driver's footwell. On my car it's a 10A fuse but check the diagram in the inside of the flap
Engine bay fuse box (10A Radio Clock)
Under the hood #4 10a
Fuse 7: 10A Red; Buzzer Module, Stop Lamps Fuse
the fuse is located under the wood.it is a red 10A fuse marked etcs
Its fuse number 3 located under the bonnet next to the battery. A 10A fuse.
In the kickboard fuse panel, marked as "meter" and it's a 10A fuse.
The windshield washer pump 10A fuse is in a fuse box located under the hood near the battery. Chevrolet has come out with a service bulletin indicating that the 10A fuse is inadequate for circuit operation. Chevrolet is suggesting to increase fuse size to 15A. Rich B.