You would need enough fabric to make a circular cloth ten feet in diameter (assuming you mean the tabletop is a circle eight feet in diameter - you aren't exactly clear on that - whether the tabletop is 8 feet in diameter or 8 feet in circumference).
It depends on the width. If it's 45" by 36", then 1 yard.
If that is the diameter, take half that number (45 inches) as the radius, and use the formula area = pi x radius2.
43 inches top to bottom
For a Rectangle table: Measure the width and length of your table, then subtract those numbers from the width and length of the tablecloth and then divide by 2. For a Round table: Measure your table at its widest, then subtract from the tablecloth diameter and then divide by 2. Example: Your table is a 60" round. The tablecloth is a 90" round. 90"-60"=30" 30" divided by 2=15" 15" the drop around the table!
84 inches round tablecloth gives a drop of 12 inches for 60 inch round table. If you want the drop up to the ground,120 inches round tablecloth is perfect fit. (above tablecloth sizes is applicable only to the std height table 29 inches)
No it will not fit. It will sit on the table like a large, odd-looking place mat. Tablecloth measurements refer to the exact size of the table cloth, not to the size of table it will fit. For a 96 inch diameter round table, you'll likely need a 120 inch diameter tablecloth to allow for 12 inch overhang all the way around. You can use a 108 inch round, which will give you a 6 inch drop or 120 inch round, which will give you a 12 inch drop or 128 inch round, which will give you a 16 inch drop
If the table height is 29 inches then 132 inches tablecloth perfect fit and it will give drop up to the ground.
Yes, the word 'tablecloth' is a noun, a word for a piece of fabric used to cover a table; a word for a thing.The noun 'tablecloth' is a closed compound noun, it has no space between the two contributing words.
If the table is 42 inches in diameter and the height is 29 inches then 102 inch tablecloth is perfect fit which gives drop to the ground.
1 of 5 Measure the diameter of your table. 2 of 5 Add the diameter of the table to twice the table's height if you want a floor-length tablecloth. 3 of 5 Add the diameter of the table to twice the desired length if you want a shorter tablecloth. (Measure the distance from the edge of the table to the desired length.) 4 of 5 Add 1 1/2 inches to your measurements to allow for a 3/4-inch hem around the bottom of the tablecloth. 5 of 5 Use this figure for both length and width of the material you will need.
If the table height is standard 29 inches, if you want the drop up to the ground, you require 132 inch round tablecloth and if you want the drop half the way (i.e 15 inches) then 102 inch round tablecloth is perfect fit.
To make a 60" round tablecloth, you must first select the fabric desired. Fabric comes in widths, 36", 48" 60". If you buy 60" fabric, you would need 1 2/3 yards, if the fabric is 45" you will need double the length or3 1/3 yards.
Assuming 82 and 72 are in the same system of measurement, yes. But an 82 centimetre table cloth will not fit a 72 inch table.
You need at least 4 yards of fabric to make a 70 inch round table cloth. Most people would use close to 6 yards to make the designs that they'd like to.
No because a round table with a circumference of 60 inches has an area of just over 286 square inches.