answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How much is zt for a 100 ohms resister in series with 100 ohms inductor?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the impedance of a series circuit containing a resistor of 100 ohms and an inductor with an Xl equal to 80 ohms?

a bowl of cereal


When Resister is 120 volts and the current through the resister is 0.5 Amps determine the value of the resistor in ohms?

Using Ohms Law, the answer is 120/0.5 = 240 Ohms.


What are the first 3 coloured strips on a resister for?

An engineer who knows the secret color code can glance at the resister and instantly know the resistence of the resister in ohms.


Why ohms law applicable only linear resister?

because they have a proportional relation


When two resister of 1000 ohms are connected in parallel their effective resistance will be?

500 ohms. RP = 1 / summation (1 / RI)


What is the international unit of resister?

Resistance is measured in Ohms.Resistance is measured in Ohms.Resistance is measured in Ohms.Resistance is measured in Ohms.


How much resistance must be connected in series with a 250 ohms inductive reactance to produce a total ciruit impedance of 400 ohms?

how much resistance must be connected in series with a 250 ohms inductive reactance to produce a total ciruit impedance of 400 ohms?


Inductive reactance has a unit in?

Ohms, resistance in an inductor increases as the frequency of the AC signal increases, this "artificial resistance" is called impedence, and it is measured in ohms


How do you work out amps of current from 230V connected to 534 ohm resister?

you divide the volts by the ohms


What would be the resonant frequency for a series RLC circuit with the following components a 1 k ohms resistor a 900 micro Henri inductor and a 0.014 micro farad capacitor?

44836.82577 Hz


Is there no induced voltage in an inductor unless the current is changing?

In an ideal inductor, no, there is no voltage induced across an inductor unless the current in the inductor is changing. However, since there are no ideal inductors nor power supplies, eventually an inductor will draw a constant current, i.e. the limit of the power supply; and, since no inductor has zero ohms at equilibrium, that current will translate to voltage.


How many volts are running through a 90 volt system with a 6 ohms resister?

...90 volts...