In order to replace a clutch on 1989 Acura Legend, you would have to remove the old one. You will do this by removing the jam nut that holds the pedal and disconnecting it from the throttle cable and replace it with a new one.Ê
To replace the clutch disc in a 1991 Acura Legend you must first remove the engine from the vehicle. Loosen the pressure plate by adjusting the bolts and remove. Put the new one where the old one was and tighten the bolts.
how to replace a water pump on a 1991 acura legend
how to replace rear shocks on a 1994 acura legend coupe
how do u find and replace a 92 acura legend thermostat
How do I put a alternotor belt on a 1991 Acura Legend
replacing headlights on a acura legend 1995
if its an 88 acura legend then you will need to remove the couple of bolts that hold it down and take it to the local auto store. like other cars you can just replace the bulb but on these acura you need to replace the whole headlight unit
"Considering that there is no such thing as a 1998 Acura Legend, I would dare say that it is impossible." I have a 1988 Acura Legend LS and I am dealing with the same issue. If you figure it out, help me out!
an acura is an American car and get a new car
must lower the exhaust system
The way to replace the thermostat on a 91 Acura Legend Coupe is to drain the radiator and remove the throttle and cable box. Remove the top of the radiator hose and the bolts. The thermostat will be inside.
Acura Legend was created in 1986.
i pay 200 for the height performance clucth and i pay 200 more for replace it.
If you really need to ask this question? Then, I suggest you take your car to A repair shop. It is not easy to do this job, And if you are not experienced in pulling motors and trannys it will be A very difficult job.
Why 1988 acura legend downshifts
How do you change transmission in a acura legend?
you have to replace the whole steering column
To change a 1995 Acura Legend starter, remove the 4 bolts around the intake pipe and lower radiator hose. Remove the starter and replace with new.
Yes, any C32A engine from 1991-1995 will fit in any other model/trim within that year range, with no modifications.
There are 3 drive belts and the timing belt. Which are you referring to? Either way you need to get a repair manual for assistance. There are a lot of steps involved to get to the timing belt.
Were are the timing marks on a 1991 acura legend
There is no such thing as a 1996 Acura Legend