it took me an hour to replace them. paid $60 for both items at advance auto parts. borrow the serpentine belt tool from advance auto so you can easily remove the belt. I was given an estimate of $160 including parts.
where can I find a diragrame that shows how to replace a water pump on a 2006 Chrysler town country tour van
Need to rePlace the water pump on a Chrysler mini van 3.3
On a 3.3l the water pump is driven by the serpentine belt. On a 3.0l the water pump is driven by the timing belt.
The process may vary slightly depending on the vehicle that the 2.7 Chrysler is in . Drain the radiator. Remove the top radiator hose. Remove the serpentine belt. Unbolt the water pump. Replace the pump, using new gaskets. Install the belt, hose, and new coolant.
Yes, it will come off if driven through an large puddle of water. It had happen to me with my 1998 T @ C.
A 78 Lebaron does not have a serpentine belt. It has Separate belts for the alternator, power steering, AC/Water pump and Smog Pump.
Possible causes for overheating include failed serpentine belt, failed water pump, internal or external coolant leak, restriction in the radiator, or inoperative radiator fan.
The water pump is driven by the timing belt, to find it you must remove the serpentine belt, crankshaft damper, and timing belt cover.
Yes, it has a serpentine belt that drives the alternator, water pump, A/C, & power steering. One belt for them all.
A Chrysler Town and Country does not have a water flow valve. The cabin temperature is controlled by a airflow door inside the dash.
powersteering belt off first, then water pump, each has its own ten.
Not that hard.