Mercedes c200 cdi hasn't got timing belt. Has got chain.
Raise the trunk lid...you will see the lights on each side of the license plate...use Phillips screw driver to remove and replace bulb. Just did this takes about 2 minutes.
No, the size and dimension will not fit. The Mercedes battery needs to be mounted with a piece of metal plate and a bolt. If it does not fit exactly, then it can't be mounted properly. weijen_hsu@yahoo.com
its the bottom plate that moves in the distributor to advance the timing
Disconnect the battery, remove the air hose to the throttle body, remove the access plate, remove the spark plug cables and the boots, and remove the spark plugs. Replace the spark plugs, replace the boots and cables, replace the access plate, attach the air hose to the throttle body and connect the battery.
i have a timing chain on my 52 plate 2.2 diesel vectra
The ECU is located under the floor plate on the passenger side on a 2004 Mercedes c230. The floor plate is attached with three nuts.
YES it has a timing belt.
Timing is done by the electronic ign and not really adjustable, yes?
As i recall, the water pump is bolted to the front of the engine block. The cooling fan, is then bolted to a 2" dia. flange, with 4 machine theard (fine) bolts that have 7"/16 There is a plate between the pump and the timing cover, don't forget to reuse that plate. The new pump should come with 2 gaskets, one goes between the pump and plate, the other goes between the plate and timing cover.
a 150
remove engine or transmission replace flex plate (flywheel).
how do you replace a honda crv licence plate bulb on a 2004