On the disc brakes I've seen (not very many), the calipers are self-adjusting. When replacing pads, the caliper must be compressed to accommodate the new, thicker pads. Other than that, I haven't heard of a brake caliper adjustment.
Ans 2 - There is no adjustment necessary in Chev/GM front brakes. If they don't work as well as expected. the caliper slides may be very rusty. Scrub the slides with a wire brush then lube with a touch of dry graphite.
A stock emergency brake, on a Chevrolet truck, can be released by manually disengaging the emergency brake. This can be accomplished by loosening the tension nut on the brake.
The 1990 K1500 pickup truck parking brake is equipped with a adjustment bolt. Turn the adjustment bolt in or out to adjust the parking brake.
1st make sure that rear service brakes are adjusted properlyThere should be an adjusting bolt either under the vehicle at the junction of the 3 cables or at the parking brake itself
No the wheels will not fit because they do not clear the brake calipers on the truck. The wheels maybe the same size but the rims don't have the clearance for the calipers
go to sears
Check at the upper end of the brake pedal undeer dash area
Sticky or stuck brake calipers. Sticky or stuck parking brake mechanism.
You don't adjust the clutch brake itself - that gets replaced. If you're trying to adjust the clutch itself, see the related question "how do you adjust a clutch on a Class 7 or 8 truck"... I've spelled it out there already
No, the brake calipers are too large, the smallest rim size is 17"
If the truck has disc brakes on the rear then the park brake shoes are located inside the rear rotors. You have to remove the brake calipers, pads and rotors to access them
yes
The same as any other vehicle.