To change the drive belt.:
1. There should be a routing diagram in the engine compartment, if there is not one make note of the proper routing so you can put the new belt on correctly.
2. Release the tensioner and remove the old belt.
3. Put the replacement belt in place, then release the tensioner and put the belt over the idler pulley and loosen the tensioner.
you would need to change the differential gears to change the gear drive.
Yes
The MAP sensor on a 1987 Chevy Celebrity is mounted to the firewall near the right fender.
The idle speed on a 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.
The timing on y our 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.
no
The fuel filter on a 1987 Chevy Celebrity is next to the fuel tank on the driver's side of the car/
my '87 celebrity does the same thing sometimes when i change gears from park to drive or even reverse and step on the gas my mechanic says it could be the choke. have it checked
The heater core in a 1987 Chevy Celebrity is in the heater plenum to the right of the hump and below the glove compartment.
The timing on a 1987 Chevy Celebrity is controlled by the engine control module, there is no provision for adjustment.
It is the main computer box.
Here is a fact sheet on the Chevy celebrity http://auto.howstuffworks.com/Chevrolet-celebrity.htm/printable I found this really interesting