To remove the rotor, you need to remove the brake pads. There should be one bolt at the bottom of the caliper unit. After you remove this bolt, you can swing that part of the caliper up and remove the pads. Next remove the 2 bolts that hold the caliper unit to the hub. Have a string handy to tie up the calipers after you take the bolts off. You don't want to put stress on the brake fluid hose or you could end up with a bigger mess on your hands. On the front of the rotor you'll notice 2 Philips screws. These have to be removed before you slide out the rotor. This is the toughest part of the job if these are rusted and won't come out easily. You might want to have a couple of new ones on hand if you damage the old ones. You'll have to be creative to remove them. After these screws are removed, you can slide out the rotor. Installation is the reverse of removal.
How do you change the starter on a 1998 Honda Civic ex?
8x1.25m
Take it to a Honda Civic garage / mechanic.
Are there any tricks or possible problems in replacing a front bumper on a 1998 Honda Civic?
There have been many positive reviews for the VGX pads and rotors for the 1998 Honda Civic LX. Consumers have consistently stated that they have good stopping capabilities, lack the dust associated with other brands, and do not have the normal squeaking that can occur with other brake pads and rotors.
It's called "brake chatter", and it's caused by warped brake rotors. Replace the rotors and the problem should go away.
1998 Honda Civic CX HB MT 2295 1998 Honda Civic CX HB AT 2357
yes
1998 Honda civic DX should have a 107 HP stock
recommended change interval is 60,000 miles
Yes.
Yes.