the park tab is bent. it is a thick piece of metal that must be bent back slightly toward the wiper motor with a hammer or plyers.
I assume this issue started when there was snow/ice on the windshield?
There are two positions for the wipers on an ES330, winter and summer position. The summer position is down under the hood, and the winter position is where I imagine they are now. To switch between the two, just requires a push down to summer position, or a tug up to winter position. The idea between the two positions is that in winter, with snow on the car, the wipers won't get stuck underneath the hood, but during the summer, when that isn't a concern, they can be tucked out of the way for a cleaner look.
A 2004 Chevy Venture can be purchased at any Chevrolet dealership in Florida. The Auto Trader is also another source to purchase a 2004 Chevy Venture in Florida.
The 2004 Chevy Venture has the most common hook-end arms. See related links below for install video. Press the tab or button which is located where the wiper blade is inserted into the hook and pull the wiper blade out of the hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
How do you change rear brake drum on a 2004 Chevy Venture?
The 3.4 litre V6 engine in a 2004 Chevrolet Venture has a timing CHAIN
Where is the pcm in the chevy venture 3.4 2004
this is most likely the return position sensor. This can often be fixed by lubricating the mechanism. It would be on the passenger side of van under a black plastic cap which runs along the engine firewall join. pop it off, pop the cap on the washer mechanism and lube it up with something like Moove iT. See if that helps.
Short to power in the horn circuit, relay stuck in the closed position, stuck horn switch.
Yes it is.
5f041kg89hg51035
P1449- Evap emission system vent shut off valve (stuck in closed position)
The 2004 Chevrolet Venture OBD 2 port is on lower edge of dash; left of or under steering column