the directions should be right under the hood left hand side if not buy a chiltons book from orielly will show how belt goes on if not just follow pulleys belt will only go on one way
If the plastic piece showing the diagram is missing on your car, you can call the Ford dealership and have them e-mail it to you. They did that for me. I can tell you there are many places on the web (and many auto parts stores) which will show you the "correct" diagram for a car, but are completely wrong!!! I got about 4 or 5 "correct" diagrams for my Ford Windstar, all of which were wrong. it wasnt until i called the dealership and spoke with the parts dept. was I able to finally get a diagram that worked.
Steve phx AZ
routing for serpentine belt 2003 mercury sable
how do you install a serpentine belt on a 1996 corsica?
See related question and answer at: http://www.wikifaqs.com/Q/How do you fix a 1998 Grand Marquis serpentine belt
how to install a serpentine belt on 1989 f250 diesel 7.3l
You cannot adjust the tension on this, it has a spring inside of it. If it is weak, it must be replaced.
Serpentine / accessory drive belts price around $15-30.Don't go cheap on this particular item.See "Related Questions" below for tons more about Sable serpentine belts.
There is NO TIMING BELT on a 1995 Mercury Sable * Both the 3.0 and the 3.8 liter V6 engines in a 1995 Mercury Sable have a timing CHAIN
Your question would be better answered if the type of belt was known, i.e. "serpentine belt" or "timing belt", etc. Also, one would need to know the size of your motor and the year.
picturediagram of how to install 89 Cherokee serpentine belt
Loosen the tensioner pulley. Slide the tensioner pulley to the right. The serpentine belt will come loose. Remove the serpentine belt. Reverse the process to install the new serpentine belt.
See "Related Questions" below for information about alternators and serpentine belts. Should be a good start to your project...
Remove serpentine belt. Remove pulley. Install new pulley. Install serpentine belt.
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
i brought my car to mechanic they install the serpentine belt # 950k6 is that the right belt
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
The belt that drives the alt and p/s is loose. If it is a serpentine belt, check the tensioner or replace the belt.
Put the new serpentine belt on to your 1992 Chevy Corsica pulleys. Push the tensioner pulley to the left to tighten the serpentine belt.
You need to remove the serpentine belt and alternator in order to get the crank sensor; one 10mm bolt holds it. It is easy to replace.
You will need to loosen the serpentine belt tensioner pulley on your 2002 Chevrolet Avalanche. Slide the belt tensioner to the right. The serpentine belt will become loose and can be removed. Reverse the process to install the new serpentine belt.
Loosen the tensioner pulley. Slide the tensioner pulley to the left. The serpentine belt will become loose. Remove the belt. Reverse the process to install the new serpentine belt.
Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
if a serpentine belt is loose, it needs replacing. there is an automatic tension pulley on all serpentine belts. so just buy a new belt and install
Begin by putting the new serpentine belt around the 1992 Mercedes-Benz engine pulleys. Tighten the serpentine belt with the tensioner pulley.
when the belt has no slack in it
Which belt? Timing or Serpentine? Serpentine is easy. Turn tension pulley with a breaker bar and pull belt off.