0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the location of expansion valve for Toyota supra?
for a 86-1/2 to 92 supra, the expansion valve is located in the evaporator case. mike b.
How do you change an expansion valve on a 2001 suzuki swift and where is it located.?
You must remove the evaporator case from behind the glovebox and disassemble it. The expansion valve is mounted to the evaporator.
Where is the expansion valve on a 1995 Lexus ES300?
It is attached to the back wall of evaporator. You have to remove the glove compartment, blower unit and evaporator to get access to the expansion valve.
Where is the expansion valve 1995 Toyota Camry?
You have to remove the blower motor and housing . Also remove glove box to see what you are doing. Re move the side cover on the evaporator and unbolt evaporator on engine side 2 bolts then pull out evaporator and expansion valve together
Where is the expansion valve located on a 1985 Nissan 720 pickup?
The expansion valve is located in front of the evaporator core. You must remove the housing to access it.
How do you change expansion valve?
You will have to remove the evaporator from underneath the dash on the passenger side. If you have the right side tools it is not a difficult job. This will require you to first evacuate your A/C system. I would recommend changing the evaporator along with the expansion valve.
Where is the expansion valve located in a 1992 Toyota Camry 3.0?
Attached to Evaporator.You have to remove the evaporator from inside the car to get to it. A pain.
Where is the expansion valve on your Mitsubishi Galant?
Expansion valve is located on the A/C Evaporator Core. Most of the times you have to remove the whole dash to reach it/ replace it. Good luck.
Where is the expansion valve for the rear air in a 1999 GMC Suburban?
In the rear of the vehicle attached to the rear evaporator, you will need to remove the complete assembly to replace the expansion valve......
How do you replace the evaporator in a 1988 Honda Accord?
How to remove the evaporator on your Honda1-evacuate ac system of 134a,2-discoonect ac lines at firewall,3-remove glove box door and glove box4-Disconnect fan motor and remove5-disconnect all connectors on evaporator housing6-remove bolts holding evaporative housing to firewall7-remove evap. housing from vehicle8-remove screws holding evap. housing together9 remove evaporator from housing10-remove expansion valve from evap.Reintsall in reverse order
Location of expansion valve on 93 Toyota corolla?
The expansion valve is located with the evaporator. You have to evacuate the system then disconnect the ac lines at the firewall. Then remove the glove box, undo connectors, and then remove the bolts that hold the evaporator case to the HVAC assembly. Slide the case out and then remove the clips and screws that hold the upper and lower halves together. Once you get it apart you will see the expansion valve. Also, take note of the electrical temperature probe's location in the evaporator. When you replace the valve and wind the thermostatic bulb's line around the evaporator's pipe take some black tar tape and wrap the expansion valve and lowside pipe. Doing that will make it more efficient. You should also replace the receiver drier if you hadn't already done so. Don't forget that you will have to add some oil to the system for the components you replace.
How do you replace the expansion valve in a Nissan 240 SX?
You need to recover the refrigerant. Remove the evaporator case and disassemble it. Replace the valve and recharge the system. It is best to install a receiver drier at the same time.
