Cars & Vehicles
Ford Expedition Eddie Bauer
Ford Expedition XLT
Ford Ranger XLT
How To

How to remove the drivers side door panel on a 1989 mercury cougar?

192021

Top Answer
User Avatar
Wiki User
2005-09-14 17:59:39
2005-09-14 17:59:39

Take out all screws that hold the trim and the panel that holds the power switches. Remove the panel that holds the swithches and take out the screws that remain. there is also a screw down next to the light at the bottom of the door. once all screws are out, lift up on the panel and it will slide right off.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

how to remove the door panel on a 1992 mercury cougar

User Avatar

On a 1996 Mercury Cougar : In the fuse panel under the drivers side of the dash : ( there is a 20 amp fuse , the panel is marked " CIGARLTR" )

User Avatar

The 1996 Mercury Cougar door panel is held in place by eight retaining clips into screws. Remove the screws. Pry outward on each retaining clip.

User Avatar

On the drivers side up under the dash you will see the fuse panel close to the drivers door

User Avatar

The fuel pump inertia switch is in the drivers footwell behind the kick panel ( there is an access hole ) in the 1999 Mercury Cougar

User Avatar

In the drivers footwell , behind the kick panel ( there is an access hole )

User Avatar

I believe it is in the drivers footwell behind the kick panel and that there is an access hole through the kick panel to reset the switch

User Avatar

To remove the door panel on a 1993 Mercury Cougar XR7, the first thing to do is to remove the lens covers from any lights in the door. The unscrew the light fixtures from the door. The door panel is attached by the use of clips. With a little nudging with a flat object, such as a screw driver, the clips will pop free of the metal.

User Avatar

On a 1999 Mercury Cougar : The fuel pump shut off switch ( inertia switch ) is in the drivers footwell behind the kick panel ( there is an access hole )

User Avatar

On a 2001 Mercury Cougar : The fuel pump shut off switch ( inertia switch ) is located in the drivers foot well behind the kick panel ( there is an access hole ) * the kick panel is the interior trim panel , in front of the front door , beside the persons feet

User Avatar

According to the 2002 Mercury Cougar Owner Guide : The fuel pump shut - off switch ( inertia switch ) is located in the drivers foot well , behind the kick panel ( there is an access hole )

User Avatar

Remove the inside door panel of your 1997 Mercury Cougar. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.

User Avatar

According to the 2001 Mercury Cougar Owner Guide : The fuel pump shut off switch ( inertia switch ) is in the drivers foot well , behind the kick panel ( there is an access hole )

User Avatar

On a 1997 Mercury Cougar : The fuse panel is under the dash , on the drivers side Also , the power distribution box ( which is " live " ) is located in the engine compartment near the battery

User Avatar

The drivers side kick panel is in the drivers footwell , just ahead of the drivers door It is an interior trim panel by the drivers left foot

User Avatar

For a 2001 Mercury Cougar : In the passenger compartment fuse panel , below the instrument panel ( # 27 is a blue color 15 amp fuse for the cigarette lighter )

User Avatar

The 2000 Mercury Cougar OBD 2 port is under driver side dash next to kick panel

User Avatar

Remove the instrument panel cover. Remove the tachometer retaining screws. Remove the tachometer cable from the back of the tachometer. Reverse the process to install the new tachometer.

User Avatar

Take the door panels off for the front. The back you can pull the grill off covering the speakers for direct access or remove the panel. Fairly easy to do, you will need torx drivers tho. I have the same question

User Avatar

I would remove the door panel and have a look at what's going on in there the window has obviously popped out of the guide.

User Avatar

It is on the passenger side, just in front of the windshield. There is panel covering it. The winshield wipers go through this panel on the drivers side; it is a two part panel. You can see this panel without opening the hood, but you will have to open the hood to get the panel off.

User Avatar

Remove the inside door panel of your 1999 Mercury cougar. The entire window mechanism will be visible. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.

User Avatar

The 2000 Mercury Cougar OBD 2 port is under driver side dash next to kick panel


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.