If it is a 3.1L V6, 1994 Skylark you have to remove the top engine mount in order to get the belt off and them back on. You must support the engine from the underside. Use a block of wood between the pan and the hydraulic jack.
the 1997 camaro doe's not have a fan belt it has a serpentine belt that you can change in about 5 min.
Changing the serpentine belt on a 97 Mitsubishi Diamante is a fairly easy task. All you need to do is get a wrench and loosen the tension pulley and pull of the serpentine belt.
Serpentine belt and pulley diagrams at www.alldatapro.com
....2 ways to replace the best. There is a pictogram on the engine cover; passenger side. On the box containing the new belt there will a diagram for your vehicle.
serpentine belt for 97 7.4 454 Chevy truck
yes,a good parts man will give you a belt to bypass your ac.
You don't tighten a serpentine belt. The tension is controlled by a tensioner. If it is loose, then the belt has stretched and needs replacing.
replacing achieva serpentine on a 96i have a 96 and you have to completely remove the motor mount and all of the bolts holding it on the engine to replace the belt,also carefully jack up the engine since it will fall on the ground if you take off the mount
i would go to a auto parts store and buy a serpentine belt tensioner tool. this isn't an easy task. i would suggest having another person to help you. also make sure you have a diagram of how the belt goes.
Its 15mm on my '97
3.3L it is serpentine belt driven.
A smaller belt