Headlights Tail and Brake Lights
Chevy Tahoe
Mazda 6
Honda Accord EX
How To

How to replace the low beam headlight on the driver side of 2000 Accord V6?

464748

Top Answer
User Avatar
Wiki User
2006-05-04 20:00:41
2006-05-04 20:00:41

Open the hood. Locate the plug+wire end that is attached to the bulb. The plug is probably white in color. There is a tab which you need to depress to pull off the plug+wire from the end of the bulb. Use a flat screwdriver to depress the tab. Don't use muscle for this, just finesse otherwise you will skin your knuckles! The bulb comes out by twisting it counter-clockwise. The lamp+socket is "L" shaped. Insert a new lamp and twist it clockwise to lock it in place. Reattach the plug+wire into the end of the socket and listen for the tab to click shut. That is it! Go to a dealer and you will be charged $40.00 to replace the low-beam lamp. The procedure to replace the high beam lamp is also the same. Good luck.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

how do you change front headlight bulb on 2000 volkswagon cabrio

User Avatar

How to replace passenger side head light bulbs in a 2000 Honda Accord?

User Avatar

How can I replace the headlamp on a 2000 Saturn SL1

User Avatar

Remove the wiring harness from your 2000 Kia headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight assembly.

User Avatar

go to back of headlight assembly and twist it out.

User Avatar

The shift sensor on a 2000 Honda accord 2.3l v-tec is on the driver side.

User Avatar

Open the bonnet. Remove the grill. Remove the screws holding the headlight in. Carefully pull the headlight out. Remove the cap on the rear of the headlight.

User Avatar

It should be a bulb. look behind the light itself. There is a plastic ring you can unscrew by hand. after that, pull the bulb out and replace it. Be careful not to touch the glass of the bulb with your hand. the oils on your skin will cause it to burn out fast.

User Avatar

turn the pistons clockwise with a special tool(pick one up from an auto shop) or try to use a screw driver.

User Avatar

To replace a headlight bulb, you will first need to remove the cover and existing bulb. Check your owners manual for instructions on how to do this.

User Avatar

If you're talking about the headlight, the "lens cover" is not a separate part, you need to replace the whole headlight assembly.

User Avatar

No, the 2000 takes a 9003 bulb and the 2004 takes a 755 bulb. See sources and related links below.

User Avatar

The 2000 Honda Accord OBD 2 port is under driver side dash next to kick panel

User Avatar

The best way it to take your Ford Explorer to the nearest Ford Dealer. He will doubtless employ mechanics who will be glad to replace the headlight assembly.

User Avatar

If just the bulb then there is lots of space you can just unscew and replace if entire headlight then unscrew the holding bolts and pull out. Then replace with new assembly.

User Avatar

For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.

User Avatar

front left lower bumper below driver headlight

User Avatar

There are 2 pins on the headlight housing. You can find them if you pop the hood and look at the top of the headlight assembly. They are flat and you won't need anything more than a flat head screw driver to get them out. Don't touch the new bulbs or they may explode once heated. Cheers.

User Avatar

how do you replace seatbelt retractor on a 2000 chevy blazer

User Avatar

you can go to your local autoparts store and they can help you replace the light

User Avatar

you dont..they are set in a harness in the back of the headlight assembly which is locked in place..you turn it to unlock it and remove it.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.